CORRIM Company Oshkosh, Wisconsin F.R.P. FIXED WINDOW FRAME   In accordance with a continuing program of product research and development, CORRIM Company reserves the right to change design and/or details of its products without notice.  All details, drawings and dimensions are accurate for estimating purposes at the time of publication.  Specific information for job details and drawings should be obtained from CORRIM Company offices or distributors. CORRIM Company Corrosion Immune Fiberglass Doors and Frames 3331 County Road A · Oshkosh, WI   54901-1414 Phone: 920-231-2000  Fax: 920-231-2238 Internet Address: www.corrim.com Email Address: info@corrim.com   TECHNICAL FACT SHEET 40-95   SPECIFICATIONS FOR FRP, FIXED GLAZING, WINDOW SYSTEM GENERAL A fiberglass fixed lite system shall be constructed from pultruded FRP and polymer component parts. The glass shall be attached to the frame by means of accessories. The accessories may be steel, stainless steel or plastics as specified at time of order. Engineering drawings must be developed and signed and accepted prior to construction. Glass is not normally provided. Stops, screws, etc., are provided as part of the assembly. FRAME A standard pultruded frame section, 5-3/4" x 2", is constructed to have four (4) sides. GLAZING OPTIONS 1 & 3: Glazing consisting of a single piece (pane) of glass, as illustrated above, is supplied by others. OPTION 2: Two (2) pieces (panes) of glass are available as shown above. All internal parts are made from suitable polymer components. Fasteners shall be stainless or plastic unless otherwise approved prior to construction. An ANCHORING SYSTEM, suited for the wall condition, will be selected prior to construction of the units so as to ensure ease of installation.